SMART Technologies 600i4 Manual Do Utilizador
84 |
CHAPTER 6 – MAINTAINING YOUR INTERACTIVE WHITEBOARD SYSTEM
Accessing the Lamp Module
To access the lamp module, remove the lamp cover, and then remove the lamp from
the projector.
To access the lamp module, remove the lamp cover, and then remove the lamp from
the projector.
To remove the lamp cover
and lamp module
1. Pull off the outer lamp cover with your finger and set it aside.
2. Using a Phillips No. 2 screwdriver, loosen the two screws on the inner lamp
module. The screws remain captive inside the lamp module.