ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador
Códigos do produto
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
Chapter 2 Introducing the Web Configurator
33
C
H A P T E R
2
Introducing the Web
Configurator
This chapter describes how to access the G-1000 v2 web configurator and provides an
overview of its screens. The default IP address of the G-1000 v2 is 192.168.1.2.
overview of its screens. The default IP address of the G-1000 v2 is 192.168.1.2.
2.1 Web Configurator Overview
The embedded web configurator allows you to manage the G-1000 v2 from anywhere through
a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer
6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It is
recommended that you set your screen resolution to 1024 by 768 pixels.
a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer
6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It is
recommended that you set your screen resolution to 1024 by 768 pixels.
2.2 Accessing the G-1000 v2 Web Configurator
1 Make sure your G-1000 v2 hardware is properly connected and prepare your computer/
computer network to connect to the G-1000 v2 (refer to the Quick Start Guide).
2
L
aunch your web browser.
3
Type
"192.168.1.2" as the URL.
4
Type
"1234" (default) as the password and click Login.
5
You
should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) and click Apply or click
Ignore.
Ignore.
Note: If you do not change the password, the following screen appears every time
you login.