ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador
Códigos do produto
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
Chapter 6 Remote Management Configuration
67
C
H A P T E R
6
Remote Management
Configuration
This chapter provides information on configuring remote management.
6.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which G-
1000 v2 interface (if any) from which computers.
1000 v2 interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access.
You may manage your G-1000 v2 from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
Note: When you choose WAN only or LAN & WAN, you still need to configure a
firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Access
Status field.
Status field.
You may only have one remote management session running at a time. The G-1000 v2
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP
6.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
• You have disabled that service in one of the remote management screens.