ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador

ZyXEL G-1000 v2 User’s Guide

68

Chapter 6 Remote Management Configuration

• The IP address in the Secured Client IP field does not match the client IP address. If it 

does not match, the G-1000 v2 will disconnect the session immediately.

• There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

• There is a firewall rule that blocks it.

There is a default system management idle timeout of five minutes (three hundred seconds). 
The G-1000 v2 automatically logs you out if the management session remains idle for longer 
than this timeout period. The management session does not time out when a statistics screen is 
polling. 

To change your G-1000 v2’s World Wide Web settings, click Advanced > Remote MGMT 
to display the WWW screen.

Figure 24   Remote Management: WWW

The following table describes the labels in this screen.

Table 25   Remote Management: WWW

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the G-1000 v2 using 

this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the G-

1000 v2 using this service. 
Select All to allow any computer to access the G-1000 v2 using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the G-1000 v2 using this service.