Honeywell N431X Manual Do Utilizador

6 - 43

You can set a time during which the engine looks for an addenda.  If an 
addenda is not found within this time period, the data can be either trans-
mitted or discarded, based on the setting you are using for 

 (page 6-42).  Set the length (in milliseconds) for this 

timeout by scanning the bar code below, then setting the timeout (from 0-
65535 milliseconds) by scanning digits from the 

, then 

.  

Default = 100.

Note: The Addenda Timeout setting is applied to all addenda and coupon 

code searches.

When this feature is On, there is a space between the data from the bar 
code and the data from the addenda.  When turned Off, there is no space.  
Default = Off.

If you are encountering errors when reading UPC-E0 bar codes, you may 
want to adjust the redundancy count.  Redundancy adjusts the number of 
times a bar code is decoded before transmission, which may reduce the 
number of errors.  Note that the higher the redundancy count, the longer it 
will take to decode the bar code.  To adjust the redundancy, scan the UPC-
E0 Redundancy bar code below, then scan a redundancy count between 0 
and 10 on the 

 inside the back cover of this manual.  

 bar code.  

Default = 1.