Honeywell N431X Manual Do Utilizador

6 - 45

This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 
data.

  Default = Off for both 2 Digit and 5 Digit Addenda.

When Required is scanned, the engine will only read EAN/JAN-13 bar 
codes that have addenda.  

Default = Not Required.

This setting programs the engine to require a 2 digit addenda only on EAN-
13 bar codes that begin with a “2.”  The following settings can be pro-
grammed:

Require 2 Digit Addenda:  All EAN-13 bar codes that begin with a “2” 
must have a 2 digit addendum.  The EAN-13 bar code with the 2 digit 
addendum is then transmitted as a single, concatenated bar code.  If a 2 
digit addendum is not found within the 

 period, the EAN-

13 bar code is discarded.

Note: if you are using 

(page 6-46), that setting will take precedence over this one.