Campbell Hausfeld IFK005 Manual Do Utilizador

Important Safety Instructions

c.    Do not use the tool if the switch 

does not turn the tool on or off. Any 
tool that cannot be controlled with 
the switch is dangerous and must be 
repaired. 

d.   Disconnect the tool from the 

air source before making any 
adjustments, changing accessories, 
or storing the tool. Such preventive 
safety measures reduce the risk of 
starting the tool unintentionally. 

e.   Store the tool when it is idle out 

of reach of children and other 
untrained persons. A tool is 
dangerous in the hands of untrained 
users. 

f.    Check for misalignment or binding 

of moving parts, breakage of parts, 
and any other condition that affects 
the tool’s operation. If damaged, 
have the tool serviced before using. 
Many accidents are caused by poorly 
maintained tools. There is a risk of 
bursting if the tool is damaged. 

g.   Use only accessories that are 

identified by the manufacturer for 
the specific tool model. Use of an 
accessory not intended for use with 
the specific tool model, increases the 
risk of injury to persons.

a.   Tool service must be performed only 

b.   When servicing a tool, use only 

c.    Use only the lubricants supplied 

a.   Never connect to an air source that 

is capable of exceeding 150 psi. 
Over pressurizing the tool is able 
to result in bursting, abnormal 
operation, breakage of the tool or 
serious injury to persons. Use only 
clean, dry, regulated compressed air 
at the rated pressure or within the 
rated pressure range as marked on 
the tool. Always verify prior to using 
the tool that the air source has been 
adjusted to the rated air pressure or 
within the rated air-pressure range. 

b.   Never use oxygen, carbon dioxide, 

combustible gases or any bottled 
gas as an air source for the tool. 
Such gases are capable of explosion 
and serious injury to persons.