Amana W10245579A Manual Do Utilizador

3. Use a rubber hose connector (not provided) with screw-type 

clamps (not provided) to connect the air gap to the waste tee 
above the drain trap and at least 20" (50.8 cm) above the floor.

4. Insert the drain hose through the hole cut in the cabinet and to 

the front and center of the opening where the drain 
connection will be made.

1. Remove the waste disposer knockout plug. 

NOTE: Do not cut the end of the drain hose.

2. Attach the drain hose to the waste disposer inlet with the large 

drain hose clamp (provided).
This connection must be before the drain trap and at least 20" 
(50.8 cm) above the floor.

NOTE: It is recommended that the drain hose be looped up 
and securely fastened to the underside of the counter.

3. Insert the drain hose through the hole cut in the cabinet and to 

the front and center of the opening where the drain 
connection will be made.

1. Cut the end of the drain hose, if needed.

NOTE: Do not cut the ribbed section.

2. Attach the drain hose to the waste tee with the large drain 

hose clamp (provided).
NOTES: 

■

If the drain hose was cut, use 1

¹⁄₂" to 2" (3.8 to 5 cm) 

screw-type clamp (not provided).

■

This connection must be before the drain trap and at least 
20" (50.8 cm) above the floor.

■

It is recommended that the drain hose be looped up and 
securely fastened to the underside of the counter.