Smeg P106 Manual Do Utilizador
Instructions for the installer
28
5.7 Regulation of minimum for LPG
To regulate the minimum for LPG, completely tighten (clockwise) the screw inside or
next to the gas tap pin (depending on the model).
The diameters of the by-passes for each burner are given in table “5.2 Regulation for
LPG ”.
next to the gas tap pin (depending on the model).
The diameters of the by-passes for each burner are given in table “5.2 Regulation for
LPG ”.
After regulation for a gas other than that inspected, replace the label on the casing
with one for the new gas. The label is inside the bag that contains the nozzles.
5.8 Arrangement of burners on hob
BURNERS
1
1
Auxiliary
2
Semi rapid
3
Medium rapid
4
Large rapid
5
UR
If the flame of the UR burners have unstable flame (the ring does not ignite or has
difficulty igniting), clean the perforated ring carefully to remove any residues deposited
difficulty igniting), clean the perforated ring carefully to remove any residues deposited
in the holes. If the problem persists after this cleaning, contact an authorised service
centre.
centre.
5.9 Lubrication of gas taps
After a while, the gas tap may become hard to turn or lock. If this happens, it has to be
cleaned inside and re-greased.
cleaned inside and re-greased.
This must be done by a qualified technician.