DeLonghi 5713214281 Manual Do Utilizador

10

To  avoid  damaging  the  appliance,  always  press  the 
button (fig. 5) to turn off.

during rinsing, a little hot water flows from the coffee spouts. 
avoid contact with splashes of water. 
To turn the appliance off, press the 

button (fig. 5). The 

appliance performs a rinse cycle then goes off.

if the appliance is not used for an extended period, place the 
main switch in the 0 position (fig. 6).
Never  place  the  main  switch  in  the  0  position  while  the 
appliance is on.

When  you  access  the  settings  menu  by  pressing  the  MeNu 
button, the following menu items can be selected:  descale,  
Set language, energy saving, Cup warmer, adjust time, auto-
start,  auto-off,  Set  temperature,  Water  hardness,  Statistics, 
default values.

Descaling
For instructions on descaling, see page 15. 

Setting the language 
To modify the language of the display, proceed as follows:
1.   Press the MENU button to enter the settings menu.
2.   Press  the    or    button  until  “Set  language”  is 

displayed;

3.   Press the OK button;
4.   Press the   or   button until the required language is 

displayed;

5.   Press the OK button to confirm;
6.   Press the ESC button exit the menu.

Energy Saving
use this function to enable or disable “energy saving” mode. 
When enabled, the function reduces energy consumption in 
compliance with european regulations.  
To enable or disable the function, proceed as follows:
1.  Press the MENU button to enter the settings menu.
2.  Press  the    or    button  until    “energy  saving”  is 

displayed;

3.   Press the OK button. “disable?” is displayed (or “enable?” 

if the function has already been disabled). 

4.  Press the OK button to disable or enable the func-tion or 

the ESC button a number of times to exit the menu.

When  the  function  is  active,  if  the  machine  is  not  used  for 
about 1 minute, “energy saving” is displayed.

•  To exit the “Energy saving” mode, first press a button, then

press the button relative to the desired drink. 

•  A few seconds may elapse between “Energy saving” mode

and delivery of the first drink; “Preparation underway...” is 
displayed. 

This function enables the cup warmer to be enabled or disabled.  

Proceed as follows:
1.  Press the MENU button to enter the settings menu.
2.  Press the   or   button until “Cup warmer” is displayed;
3.   Press the OK button. “enable?” is displayed (or “disable?” 

if the function has already been enabled). 

4.  Press the OK button to enable or disable the func-tion or 

the ESC button a number of times to exit the menu.

Warming the cups keeps the coffee hot. 

Adjust time
To adjust the time on the display, proceed as follows:
1.   Press the MENU button to enter the settings menu.
2.   Press the   or   button until “adjust time” is displayed;

3.   Press the OK button. The hours flash on the display;
4.   Press the   or   button to change the hours;

5.   Press the OK button to confirm. The minutes flash on the 

display;

6.   Press the   or   button to change the minutes;

7.   Press the OK button to confirm;

8.   Press the ESC button to exit the settings menu.

The display shows the time when the appliance is in stand-by 
ro the energy saving mode is enabled: if the time is not set, the 
display shows “0:00” blinking. 

Auto-Start
you can set the auto-start time in order to have the appliance 
ready at a certain time (for example in the morning) so you can 
make coffee immediately. 

To enable this function, the time must be set correctly.
To enabled auto-on, proceed as follows:
1.   Press the MENU button to enter the settings menu.
2.   Press the   or   button until “auto-start” is displayed;
3.   Press the OK button. “enable?” is displayed;
4.  Press the OK button. The hours flash on the display;
5.  Press the   or   button to select the hours;
6.   Press the OK button to confirm. The minutes flash on the 

display;

7.   Press the   or   button to change the minutes;