Thermador PODMW301 Manual Do Utilizador

English 23

Lens

10W 
Halogen
Lamp

Fixing
Clip

Housing

Ceramic
Holder

Holder
Clip

Slide 
screw 
driver tip 
here

1.

Turn off circuit breaker.

2. Remove oven racks.
3.

Slide the tip of a flat blade screw driver between the 
fixing clip and the lamp housing.

4. Support the glass lens cover with two fingers along 

the bottom edge to prevent the cover from falling to 
the bottom of the oven.

5. G

ently twist the flat blade screw driver to loosen the 

glass lens cover.

6. Remove the glass lens cover and fixing clip.
7. Remove the bulb by grasping and sliding the bulb 

straight out until the two prongs have cleared the 
ceramic holder.

8. D

o not touch the glass of the new replacement bulb 

with your fingers.  It will cause the bulb to fail when it 

first lights.  Grasp the replacement bulb with a clean 

paper towel or facial tissue with the prongs facing 

down.  Locate the two prongs in the ceramic holder, 

gently poking until the two prongs locate in the 

ceramic socket.

9. Press in to seat the bulb.
10. Slide the protective lens into the holder clip and 

push the other end until the fixing clip snaps  back 
into the housing.

11. Turn on circuit breaker.

Loosen 

glass lens 

cover and 
remove