Thermador PODMW301 Manual Do Utilizador

Página de 108
English 21
Maintenance
Replacing an Oven Light
Use only 10 Watt, 12 Volt bi-pin halogen light bulbs. These 
bulbs can be purchased through retail stores. 
Use a clean, dry cloth to handle halogen light bulbs. This 
will increase the life of the bulb.
Flat Rack
Wash with hot soapy water. Rinse 
thoroughly and dry, or gently rub 
with cleansing powder or soap-filled 
pads as directed. DO NOT clean the 
rack in the self-cleaning oven.
If the flat racks are cleaned in the 
oven during the self clean mode, 
they will loose their shiny finish and 
may not glide smoothly. If this 
happens, wipe the rack edges with a 
small amount of vegetable oil. Then 
wipe off excess.
Telescopic Rack
Wash with hot soapy water. Rinse 
thoroughly and dry, or gently rub 
with cleansing powder or soap-filled 
pads as directed. Avoid getting 
cleansing powder in the telescopic 
slides. Re-lubrication may become 
necessary. Use only high-
temperature food-grade lubricants to 
re-lubricate slides.
DO NOT clean the rack in the self-
cleaning oven.
Fiberglass 
Gasket
DO NOT CLEAN GASKET.
Glass
Wash with soap and water or glass 
cleaner. Use Fantastik® or Formula 
409® to remove grease spatters and 
stubborn stains. 
Painted 
Surfaces
Clean with hot soapy water or apply 
Fantastik® or Formula 409® to a 
clean sponge or paper towel and 
wipe clean. Avoid using powder 
cleaning agents, steel wool pads 
and oven cleaners.
Porcelain 
Surfaces
Immediately wipe up acid spills like 
fruit juice, milk and tomatoes with a 
dry cloth. Do not use a moistened 
sponge/cloth on hot porcelain. When 
cool, clean with hot soapy water or 
apply Bon-Ami® or Soft Scrub® to a 
damp sponge. Rinse and dry. For 
stubborn stains, use soap-filled 
pads. It is normal for porcelain to 
show fine lines with age due to 
exposure to heat and food soil.
Part
Recommendations
Stainless Steel 
Surfaces
Always wipe or rub in the direction of 
the grain. Clean with a soapy 
sponge, then rinse and dry, or wipe 
with Fantastik® or Formula 409® 
sprayed on a paper towel. Protect 
and polish with Stainless Steel 
Magic® and a soft cloth. Remove 
water spots with a cloth dampened 
with white vinegar. Use Bar Keeper's 
Friend® to remove heat 
discoloration.
Plastic & 
Controls
When cool, clean with soapy water, 
rinse and dry.
Probe
Wipe with soapy water. Do not 
submerge. Do not wash in the 
dishwasher.
Printed areas 
(words & 
numbers)
Do not use abrasive cleansers or 
petroleum based solvents.
CAUTION:
Make sure the appliance and lights are 
cool and power to the appliance has been 
turned off before replacing the light 
bulb(s). Failure to do so could result in 
electrical shock or burns.
The lenses must be in place when using 
the appliance.
The lenses serve to protect the light bulb 
from breaking.
The lenses are made of glass. Handle 
carefully to avoid breaking. Broken glass 
could cause an injury.
Light socket is live when door is open.
Part
Recommendations