Dacor MOH Manual Do Utilizador

1.  Before proceeding, turn off power to the circuit to which 

the oven will be connected at the circuit breaker or fuse 

box.

2.  Position the oven directly in front of the cabinet cutout.
3.  Feed the appliance conduit into the electrical junction 

box and attach it using a UL approved strain relief.

4.  Depending upon local codes, utilize one of three meth-

ods to connect the appliance to the electrical power:
◊  Connect to a four (4) wire electrical system
◊  Connect to a three (3) wire electrical system, where 

local codes permit

◊  Connect to a three (3) wire electrical system with 

external ground, according to local codes.

Connecting to a Four (4) Wire Electrical 

System

1.  Separate the wires coming out of the appliance conduit.
2.  Connect the white wire from the appliance conduit to 

the white (neutral) supply wire in the junction box.

3.  Connect the black wire from the appliance conduit to 

the black (L1) supply wire in the junction box.

4.  Connect the red wire from the appliance conduit to the 

red (L2) supply wire in the junction box.

5.  Connect the green wire from the appliance conduit to 

the green (ground) wire in the junction box.

Installation Instructions

Electrical Service Installation

•  Wire the oven only in compliance with local ordinanc-

es.

•  If the electrical service provided does not meet the 

product specifications, do not proceed with the instal-

lation. Call a licensed electrician to install the required 

wiring.

•  To prevent an electric shock or fire hazard, turn off 

power to the circuit at the circuit breaker or fuse box 

prior to connecting the wiring to the oven.

•  Improper connection of the electrical wiring can cause 

an electric shock hazard and damage the appliance. 

Dacor is not responsible for damages resulting from 

improper installation.

•  Connect the ground terminal (or lead) on the appliance 

to a grounded, metallic, permanent wiring system  or 

grounding conductor.

•  Do not use an extension cord with this appliance. 

Such use may result in fire, electric shock or other per-

sonal injury.

•  Do not install a fuse in the neutral or ground circuit. A 

fuse in the neutral or ground circuit may result in an 

electric shock hazard.

•  The appliance must be connected to the power supply 

with copper wire only. The use of aluminum wire may 

result in unsatisfactory connections.

•  Flexible armored or non-metallic, sheathed copper 

cable (with grounding wire) should be used to connect 

the appliance to the junction box. An UL-listed connec-

tor must be used to directly connect the cable to the 

junction box.

Make sure that the conduit is long enough to allow the 

oven to be pulled out for service without disconnecting it 

from power.

Junction box

Cable from circuit breaker 

panel or fuse box

Conduit to 

wall oven

RED

WHITE

BLACK

GREEN

RED

WHITE

BLACK

GREEN

Wire nut

(4 places)