Insys GSM 4.2 I4 11-02-01-03-01.038 Manual Do Utilizador
Códigos do produto
11-02-01-03-01.038
INSYS GSM 4.2 I4
Operating Modes
Dez-06
31
The data connection remains established, while the entered extended INSYS AT**
commands are processed at the remote device. The device changes back to connection
mode with AT**EXIT.
If it has been set, the remote configuration password is queried before changing to the
remote configuration mode.
commands are processed at the remote device. The device changes back to connection
mode with AT**EXIT.
If it has been set, the remote configuration password is queried before changing to the
remote configuration mode.
4.2.4 SMS configuration
You can also send the extended INSYS AT** commands to the device via SMS. (see
Chap. 6.2.4)
The commands sent via SMS will be executed as soon as the device is in command mode.
Chap. 6.2.4)
The commands sent via SMS will be executed as soon as the device is in command mode.
4.3
Alarm State
As soon as an alarm input of the device has been activated, existing data and voice con-
nections are terminated. Incoming commands are ignored during the processing of the
alarm actions. If an input is activated while processing an alarm at the other input, the
second alarm state is saved and executed subsequently.
If an connection cannot be established, a re-dial is attempted after one minute until the
defined maximum number of dial-up attempts is reached. (see Chap. 6.1.3)
The LED Status is flashing during the (attempted) connection set-up.
nections are terminated. Incoming commands are ignored during the processing of the
alarm actions. If an input is activated while processing an alarm at the other input, the
second alarm state is saved and executed subsequently.
If an connection cannot be established, a re-dial is attempted after one minute until the
defined maximum number of dial-up attempts is reached. (see Chap. 6.1.3)
The LED Status is flashing during the (attempted) connection set-up.
4.4
AT Commands for Switching into another Operating Mode
***
Activate remote configuration mode
+++
Activate online command mode
ATD
Establish a connection
ATH
Terminate connection
AT**EXIT
Exit remote configuration mode
ATO
Exit online command mode
AT**PASSC
Password for remote configuration
AT**ESC
Escape character for remote command mode