KitchenAid KPWB100OB Manual Do Utilizador

Página de 12
4
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.
WARNING
Electrical Requirements
This waffl e maker is designed for use with 120 V, 60 Hz only. It 
has a 3-prong grounded plug. To reduce the risk of electrical 
shock, this plug will fi t in an outlet only one way. If the plug does 
not fi t in the outlet, contact a qualifi ed electrician. Do not modify 
the plug in any way.
A short power-supply cord is provided to reduce the risk 
resulting from becoming entangled in or tripping over a longer 
cord. Do not use an extension cord. If the power supply cord is 
too short, have a qualifi ed electrician or service technician install 
an outlet near the appliance.
Service Preparation
Cushion the service area to keep from scratching the waffl e 
baker or damaging the controls and display surfaces. A clean 
folded towel will usually work well for this purpose.
TESTING THE WAFFLE BAKER
In some situations you will have to test the performance of the 
waffl e baker to identify and diagnose the problem.
PERFORMANCE
You can observe the performance of a waffl e baker by 
establishing benchmarks on the performance seen on prior 
waffl e bakers. Here is a list of performance parameters to 
observe.
 EXAMPLE:  Bake time: 3 minutes 30 seconds (3:30)
 
 
Bake temperature: 350º F
■    
Time to Bake Two Waffl es – Measure the time needed to bake 
two waffl es (one cup batter each) on the two waffl e plates. 
Longer baking times will produce darker, crispier waffl es.   
For your fi rst waffl es, a good starting time is 3 minutes, 30 
seconds. The baking time can be set in 15-second increments 
from a minimum of 2 minutes, 30 seconds to maximum of 5 
minutes, 30 seconds.
■    
Waffl e Plate Temperature – Pre-heat waffl e baker, then 
measure the temperature on each waffl e plate.
Service Procedures 
Perform all service on the Pro Line™ Waffl e Baker with the unit 
disconnected from the AC mains.
CLAMSHELL BAKING UNIT REPLACEMENT
The clamshell unit is not replaceable – we do not replace top or 
bottom lids, waffl e plates or heating elements.
 
TIMER ADJUSTMENT KNOB REPLACEMENT
The timer adjustment knob sets the baking time in 15-second 
increments from 2 minutes and 30 seconds (2:30) to 5 minutes 
and 30 seconds (5:30). Turn knob clockwise to increase baking 
time; turn counter-clockwise to decrease baking time.
1. Unplug the waffl e baker.
2.  Place the waffl e baker upside down on a cushioned surface.
3.   Remove four (4) recessed Phillips screws from feet and two 
(2) recessed Phillips screws from base cover.
4.  
Remove one Phillips screw from the ferrite bead fastener. 
Then remove the 5-pin connector from the power PCB. This 
will allow for easy access to the control PCB.
5.  
LIft off base.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.