JVC KV-DV7 Manual Do Utilizador
ENGLISH
23
DVD
3
Press ENTER.
Digital Out selecting screen appears.
4
Press Cursor
∞
(or
5
) to select an
appropriate output, then press
ENTER.
ENTER.
• STREAM: Select this when connecting an
amplifier or a decoder
compatible with Dolby Digital
and with DTS Digital Surround.
compatible with Dolby Digital
and with DTS Digital Surround.
• LPCM:
Select this when connecting an
amplifier or a decoder
incompatible with Dolby Digital.
amplifier or a decoder
incompatible with Dolby Digital.
• OFF:
Select this when you use the
AUDIO L/R (analog) jacks on
the rear.
Only with this setting, you
can enjoy original high-
quality sound of disc whose
sampling frequency is 96 kHz
through the AUDIO L/R jacks.
(No signal will be output from
the DIGITAL OUT terminal.)
AUDIO L/R (analog) jacks on
the rear.
Only with this setting, you
can enjoy original high-
quality sound of disc whose
sampling frequency is 96 kHz
through the AUDIO L/R jacks.
(No signal will be output from
the DIGITAL OUT terminal.)
For more detailed information about the output
signals, see page 35.
signals, see page 35.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
SETUP while holding SHIFT (S).
ENTER
ENTER
H/P VOL
H/P VOL
ENTER
H/P VOL
H/P VOL
TO BE CONTINUED
ENTER
H/P VOL
H/P VOL
DIGITAL OUT
STREAM
STREAM
LPCM
LPCM
LPCM
OFF
OFF
OFF
RETURN
SELECT
OK
ENTER
COMPRESSION
FULL
FULL
STNDARD
STNDARD
STNDARD
NIGHT
NIGHT
NIGHT
RETURN
SELECT
OK
ENTER
AUDIO
DIGITAL OUT:
DIGITAL OUT:
STREAM
STREAM
COMPRESSION: STANDARD
COMPRESSION: STANDARD
AUDIO DURING :
AUDIO DURING : ON
ON
¡
RETURN
SELECT
OK
ENTER
Setting compression
You can compress the dynamic range (difference
between the maximum and minimum sound
levels) while playing a source encoded with Dolby
Digital. This is useful when listening at a low
volume level.
between the maximum and minimum sound
levels) while playing a source encoded with Dolby
Digital. This is useful when listening at a low
volume level.
To go back to the previous screen during the
procedure, press RETURN
procedure, press RETURN
.
1
While holding SHIFT (S), press
MENU/SETUP.
MENU/SETUP.
Setup Menu appears on the screen.
2
Press Cursor
∞
(or
5
) to select
“AUDIO,” then press ENTER.
Audio menu appears.
3
Press Cursor
∞
(or
5
) to select
“COMPRESSION,” then press
ENTER.
ENTER.
Compression Rate selecting screen
appears.
appears.
and
MENU
SETUP
SETUP MENU
LANGUAGES
AUDIO
DISPLAY
RETURN
SELECT
OK
ENTER
SHIFT
S
EN20-28.KV-DV7[J]_f
01.2.21, 8:06 PM
23