Whirlpool RF366PXG Manual Do Utilizador

Página de 19
14
How the Cycle Works
IMPORTANT:
 The heating and cooling of porcelain on steel in the 
oven may result in discoloring, loss of gloss, hairline cracks and 
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil 
to a powdery ash. 
The oven is preset for a 3
 hour 30 minute clean cycle, but the 
time can be changed. Suggested clean times are 2 hours 30 
minutes for light soil and between 3
 hours 30 minutes to 4 hours 
30 minutes for average to heavy soil. 
Once the oven has completely cooled, remove ash with a damp 
cloth.
To Self-Clean:
Before self-cleaning, make sure the door is closed completely 
or it will not lock and the cycle will not begin. DOOR 
LOCKED/CLEANING light will flash until the door is closed.
1.
Push in and turn the oven control knob to CLEAN.
The door will lock within 6 seconds, and OVEN ON and OVEN 
HEATING indicator lights will come on.
If the door does not lock, it will try to lock for 1 minute. If the 
door fails to lock, the self-cleaning cycle will be canceled and 
an error code will be displayed.
2.
Press the “up” or “down” arrow pads to select a clean time 
between 2 hours 30 minutes and 4 hours 30 minutes.
During the last 30 minutes of the self-cleaning cycle the oven 
will start to cool down. The OVEN HEATING light will turn off 
and “COOL” appears in the display.
Once the oven goes below the locked temperature, the OVEN 
ON light flashes and DOOR LOCKED/CLEANING light turns 
off when door unlocks.
3.
Turn the oven control knob to OFF when finished cleaning.
The OVEN ON light turns off and the time of day appears in 
the display.
General Cleaning
IMPORTANT:
 Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.
CONTROL PANEL
Do not use abrasive cleaners, steel-wool pads, gritty wash cloths 
or some paper towels. Damage may occur.
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire appliance is cool. These spills 
may affect the finish.
Glass cleaner, mild liquid cleaner or non-abrasive scrubbing 
pad:
Gently clean around the model and serial number plate 
because scrubbing may remove numbers.
STAINLESS STEEL 
(
on some models)
Do not use soap-filled scouring pads, abrasive cleaners, steel-
wool pads, gritty wash cloths or some paper towels. Damage 
may occur.
Do not use Cooktop Polishing Creme.
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner & Polish:
 See “Assistance or Service” to order.
Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
Vinegar for hard water spots