Whirlpool RF366PXG Manual Do Utilizador

Página de 19
15
CERAMIC GLASS 
(on some models)
Do not use steel wool, abrasive powder cleansers, chlorine 
bleach, rust remover or ammonia because damage may occur.
Always wipe with a clean, wet cloth or sponge and dry thoroughly 
to prevent streaking and staining.
Cooktop Polishing Creme is recommended regularly to help 
prevent scratches, pitting and abrasions and to condition the 
cooktop, and can be ordered as an accessory. See “Assistance 
or Service” to order.
A Cooktop Scraper is also recommended for stubborn soils, and 
can be ordered as an accessory. See “Assistance or Service” to 
order. The Cooktop Scraper uses razor blades. Store razor 
blades out of the reach of children.
Light to moderate soil
Paper towels or clean damp sponge:
Clean while the cooktop is still warm. You may want to wear 
oven mitts while doing so.
Sugary spills (jellies, candy, syrup)
Cooktop Scraper:
Clean while the cooktop is still warm. You may want to wear 
oven mitts while doing so.
Cooktop Polishing Creme and clean damp paper towel:
Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears.
Heavy soil, dark streaks, specks and discoloration
Cooktop Polishing Creme or non-abrasive cleanser:
Rub product into soil with a damp paper towel or soft cloth. 
Continue rubbing until white film disappears.
Burned-on soil
Cooktop Polishing Creme and Cooktop Scraper:
Rub creme into soil with damp paper towel. Hold scraper as 
flat as possible on surface and scrape. Repeat for stubborn 
spots. Polish entire cooktop with creme and paper towel.
Metal marks from aluminum and copper
Cooktop Polishing Creme:
Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears. The marks will not totally 
disappear but after many cleanings become less noticeable.
Tiny scratches and abrasions
Cooktop Polishing Creme:
Rub creme into surface with a damp paper towel or soft 
cloth. Continue rubbing until white film disappears. Scratches 
and abrasions do not affect cooking performance and after 
many cleanings become less noticeable.
COOKTOP CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.
COIL ELEMENTS 
(on some models)
Do not clean or immerse in water. Soil will burn off when hot.
For more information, see “Coil Elements and Burner Bowls”.
Damp cloth:
Make sure control knobs are off and elements are cool.
BURNER BOWLS 
(on some models)
Solution of 
¹|₂ cup (125 mL) ammonia to 1 gallon (3.75 L) 
water:
Soak for 20 minutes, then scrub with stainless steel wool 
pad.
Oven cleaner:
Follow product label instructions.
Mildly abrasive cleanser:
Scrub with wet scouring pad.
Porcelain enamel only, not chrome
Dishwasher
SURFACE UNDER COOKTOP 
(on some models)
Do not remove the cooktop to avoid product damage.
For more information, see “Lift-up Cooktop” section.
Steel wool pad
CONTROL PANEL
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.
OVEN CAVITY
Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.
Self-Cleaning models
Self-Cleaning cycle:
See “Self-Cleaning Cycle” first.
Standard-Cleaning models
On some models, the oven door can be removed. See “Oven 
Door” first.
Steel wool pad
Oven cleaner:
Follow product label instructions. Make sure room is well-
ventilated. Do not let cleaner contact gasket, thermostat or 
exterior surfaces because damage will occur. Line the floor 
with newspaper.
OVEN DOOR GLASS 
(on some models)
Glass cleaner and paper towels or non-abrasive plastic 
scrubbing pad