Kenwood TK-5710 Manual Do Utilizador

21

Note:  DTMF calls can be made only in Conventional FM Operation.

■ M

Note:  To make a DTMF call using manual dialing, you must use an optional microphone with a
DTMF keypad.

1 Press and hold the microphone PTT switch.

2 Enter the desired digits using the DTMF keypad.

• If you release the PTT switch, transmit mode will end even if the complete

number has not been sent.

■ S

1 Enter the desired digits using the DTMF keypad.

• The digits appear on the display as you enter them.
• You can enter up to 31 digits before transmitting.

2 After entering the complete number, press the microphone PTT switch to

transmit.

Note:  If you switch the power OFF before transmitting the number, the number will be cleared.

■ K

If your dealer has activated the Keypad Auto PTT function, simply press the
keys on the keypad to make the call.

• The DTMF code will be sent automatically when you press a key.

Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.

1 Press the key programmed as Autodial.

• “CODE?” or the first entry in the Autodial list appears on the display.

2 Press the GRP 

 and 

 keys, rotate the CH control, or enter the

appropriate DTMF number (01 ~ 32) to select your desired Autodial list number.

3 Press the microphone PTT switch or the PF 4 key to make the call.

This function is used when a transceiver is stolen or lost.  When the transceiver
receives a call containing a stun code, either transmit mode will be disabled, or
both receive mode and transmit mode will be disabled.  The stun code is
cancelled when the transceiver receives a call with a revive code.