Kenwood TK-5710 Manual Do Utilizador

Página de 41
23
SCRAMBLER (FM)/ ENCRYPTION (APCO)
Note:
◆ The Scrambler function can be used only in Conventional FM Operation.  Additionally, the Voice
Scrambler board must be installed before this function can be activated.
◆ Ask your dealer for details concerning the Voice Scrambler board and the Encryption DES/AES
settings.
S
ECURE
 (E
NCRYPTED
) T
RANSMISSION
Press the key programmed as ScramblerEncryption to switch the transceiver
to secure (encrypted) transmission.
• The 
 (KCH-14) or 
OPT
 (KCH-15) icon appears on the display.
• Pressing the microphone PTT switch after the Scrambler or Encryption function has
been turned ON encrypts the transmitted signal.
• Each group member must activate their respective Scrambler/ Encryption functions to
descramble the received signals.
S
ELECTING
 
THE
 S
CRAMBLER
 C
ODE
 (FM)
Press the key programmed as Scrambler/ Encryption Code or press and
hold the key programmed as Scrambler/ Encryption for 1 second, to enter
Code Selection mode.
Press the GRP 
 and 
 keys or rotate the CH control to increase or
decrease the Scrambler code.
• There are 16 available Scrambler codes (1 ~ 16).
• Each group member must use the same code  in order for the transceivers to
descramble the received signals.
Press the PF 1PF 2, or PF 3 key (the first, second, or third key from the left,
after the CH control) to exit Code Selection mode.
S
ELECTING
 
THE
 E
NCRYPTION
 K
EY
 (APCO)
Press the key programmed as Scrambler/ Encryption Code or press and
hold the key programmed as Scrambler/ Encryption for 1 second, to enter
Key Selection mode.
Press the GRP 
 and 
 keys or rotate the CH control to select the new
Encryption key.
• There are 16 available Encryption keys (1 ~ 16).
• Each group member must select a code that is in each member’s key list in order
for the transceivers to descramble the received signals.
Press the PF 1PF 2, or PF 3 key (the first, second, or third key from the left,
after the CH control) to exit Key Selection mode.
Note:  To return the transceiver to the default programmed Encryption key, select “PRESET”.
However, if you delete the Encryption key {page 24}, it will not be recovered.