Kenwood TK-5910 Manual Do Utilizador

3

■

  Channels programmed for Conventional P5 and Trunking P5 operation 

already have a Group ID assigned.  For these channels, simply press and hold 

the 

PTT switch to make the call.

•  On Trunking channels, if the traffic channel is busy, a busy message appears and 

the busy tone sounds.  Release the 

PTT switch and wait for the channel to become 

free.  When the traffic channel becomes free, a proceed tone sounds.

  Otherwise, if a key has been programmed with 

Talkgroup (Conventional P5 

only), you can select a group ID from the list to make a call to those parties.  

To select a group ID:
1  Press the key programmed as Talkgroup.
2  Press the GRP 

 and 

 keys or rotate the 

CH control to select a group 

ID/name from the list that has been pre-entered into your transceiver.

•  The target group ID/name appears on the display.

3  Press the PF 1 key to accept the group ID/name.
4  Press and hold the microphone PTT switch to make the call.

•  Speak into the transceiver as you would during a normal transmission.

■

  If a key has been programmed with 

Individual, you can make calls to 

specified persons.
1  Press the key programmed as Individual.
2  Press the GRP 

 and 

 keys or rotate the 

CH control to select a unit ID 

from the list that has been pre-entered into your transceiver.

•  Alternatively, you can directly enter a unit ID by using a DTMF keypad.
•  The target unit ID/name appears on the display.

3  Press and hold the microphone PTT switch to make the call.

•  Speak into the transceiver as you would during a normal transmission.
•  On Trunking channels, a ringing tone will sound and the display will alternate 

between the called unit ID/name and “CALLING”.

4  On Trunking channels, to end the call, press the PF 1 key or the DTMF # 

key.