Kenwood TK-5910 Manual Do Utilizador

3

Note:  DTMF calls can be made only in Conventional FM Operation.

■

Note:  To make a DTMF call using manual dialing, you must use an optional microphone with a 

DTMF keypad.

1  Press and hold the microphone PTT switch.
2  Enter the desired digits using the DTMF keypad.

•  If you release the 

PTT switch, transmit mode will end even if the complete 

number has not been sent.

■

  If your dealer has activated the Keypad Auto PTT function, simply press the 

keys on the keypad to make the call.

•  The DTMF code will be sent automatically when you press a key.

■

1  Enter the desired digits using the DTMF keypad.

•  The digits appear on the display as you enter them.
•  You can enter up to 3 digits before transmitting.

2  After entering the complete number, press the microphone PTT switch to 

transmit.

Note:  If you switch the power OFF before transmitting the number, the number will be cleared.

Autodial allows you to quickly call DTMF numbers that have been programmed 

onto your transceiver.
1  Press the key programmed as Autodial.

•  “CODE?” or the first entry in the Autodial list appears on the display.

2  Press the GRP 

 and 

 keys, rotate the 

CH control, or enter the 

appropriate DTMF number (0 ~ 3) to select your desired Autodial list 

number.

3  Press the microphone PTT switch or the PF 4 key to make the call.

This function is used when a transceiver is stolen or lost.  When the transceiver 

receives a call containing a stun code, either transmit mode will be disabled, 

or both receive mode and transmit mode will be disabled.  The stun code is 

cancelled when the transceiver receives a call with a revive code.