Renesas R5S72621 Manual Do Utilizador
Section 26 USB 2.0 Host/Function Module
Page 1370 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W Description
Value R/W Description
11, 10
MBW[1:0]
00
R/W
CFIFO Port Access Bit Width
Specifies the bit width for accessing the CFIFO port.
00: 8-bit width
01: 16-bit width
10: 32-bit width
11: Setting prohibited
Once reading data is started after setting these bits,
these bits should not be modified until all the data has
been read.
these bits should not be modified until all the data has
been read.
When the selected pipe is in the receiving direction,
these bits should be set in the following timing:
Set the CURPIPE and MBW bits simultaneously.
When the DCP is selected (CURPIPE = B'000),
these bits should be set in the following timing:
Set the CURPIPE and MBW bits simultaneously.
When the DCP is selected (CURPIPE = B'000),
set the ISEL and MBW bits simultaneously.
For details, see section 26.4.4, FIFO Buffer Memory.
When the selected pipe is in the transmitting
direction, the bit width cannot be changed from the 8-
bit width to the 16-/32-bit width or from the 16-bit
width to the 32-bit width while data is being written to
the buffer memory.
direction, the bit width cannot be changed from the 8-
bit width to the 16-/32-bit width or from the 16-bit
width to the 32-bit width while data is being written to
the buffer memory.
9
0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
always be 0.
8
BIGEND
0
R/W
CFIFO Port Endian Control
Specifies the byte endian for the CFIFO port.
0: Little endian
1: Big endian
7, 6
All
0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
should always be 0.