Renesas R5S72621 Manual Do Utilizador
Section 26 USB 2.0 Host/Function Module
R01UH0134EJ0400 Rev. 4.00
Page 1371 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W Description
Value R/W Description
5
ISEL
0
R/W
CFIFO Port Access Direction When DCP is Selected
0: Reading from the buffer memory is selected
1: Writing to the buffer memory is selected
After writing to this bit with the DCP being a selected
pipe, read this bit to check that the written value
agrees with the read value before proceeding to the
next process.
pipe, read this bit to check that the written value
agrees with the read value before proceeding to the
next process.
Even if an attempt is made to modify the setting of
this bit during access to the FIFO buffer, the current
access setting is retained until the access is
completed. Then, the modification becomes effective
thus enabling continuous access.
this bit during access to the FIFO buffer, the current
access setting is retained until the access is
completed. Then, the modification becomes effective
thus enabling continuous access.
Set this bit and the CURPIPE bits simultaneously.
4
0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
always be 0.