Philips M1351A Manual Do Utilizador
Configuring the Monitor Using Barcodes
Chapter 4 Configuring the Monitor
29
Configuring the Monitor Using Barcodes
The time format, date format, IUP scale and paper format can be set using barcodes. To
select a setting using a barcode, read the required barcode from the separate Feature Setting
Sheet provided with the Barcode Reader Kit.
To configure the Modem Interface Module using a Barcode Reader, refer to “Using the
Modem Setup Barcodes” on page 164.
select a setting using a barcode, read the required barcode from the separate Feature Setting
Sheet provided with the Barcode Reader Kit.
To configure the Modem Interface Module using a Barcode Reader, refer to “Using the
Modem Setup Barcodes” on page 164.
Configuring the Monitor Using a PC
The service program (M1360-68875) allows you to carry out various extended
configuration and service functions on the monitor. Contact your Philips Sales Office for
details.
configuration and service functions on the monitor. Contact your Philips Sales Office for
details.
The Software Program is supplied in a kit which contains:
l
3.5 inch disk containing the software.
l
Cable adapter for connecting to a PC.
The program can be run on an industry-standard PC. To use the program with a Vectra,
you must replace the adapter on the end of the cable with the one provided, and copy the
software onto a disk.
you must replace the adapter on the end of the cable with the one provided, and copy the
software onto a disk.
Figure 4-1 Cable for an Industry Standard compatible PC