Yamaha NS-IW660 Manual Do Utilizador
6
CONNECTIONS
z
Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the
receiver.
z
Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect
the (–) terminals on both components using the other side of the cable.
Notes:
z
Make sure that the bare wires are not touching each other as this could damage the speaker and receiver.
z
Connect one speaker to the left terminals of your receiver, and another speaker to the right terminals,
making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound
will be unnatural and lack bass.
will be unnatural and lack bass.
z
How to connect
1 Hold down the knob.
2 Insert the bare wire. Remove the insulation
2 Insert the bare wire. Remove the insulation
coating at the extremity of each speaker cable
by twisting the coating off.
by twisting the coating off.
3 Release the knob. Test the firmness of the
connection by pulling lightly on the cable at the
terminal.
terminal.
z
When using a banana plug
Insert the banana plug into the terminal. Test the
firmness of the connection by pulling lightly on the
cable at the terminal.
firmness of the connection by pulling lightly on the
cable at the terminal.
NS-IW660
Receiver
Banana plug
Red (+)
Black (–)
1
2
(–)
(+)
3