Справочник Пользователя для Yamaha NS-IW660

6

z

  Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the 

receiver.

z

  Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect 

the (–) terminals on both components using the other side of the cable.

z

  Make sure that the bare wires are not touching each other as this could damage the speaker and receiver.

z

  Connect one speaker to the left terminals of your receiver, and another speaker to the right terminals, 

making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound 
will be unnatural and lack bass.

z

  How to connect

1 Hold down the knob.
2 Insert the bare wire. Remove the insulation 

3 Release the knob. Test the firmness of the 

connection by pulling lightly on the cable at the 
terminal.

z

  When using a banana plug

Insert the banana plug into the terminal. Test the 
firmness of the connection by pulling lightly on the 
cable at the terminal.

Banana plug

Red (+)

Black (–)

(–)

(+)