Philips BTM630/05 Manual Do Utilizador
English
7
Preparations
Rear connections
The type plate is located at the bottom of
the system.
For users in the U.K.: please follow the
instructions on page 2.
the system.
For users in the U.K.: please follow the
instructions on page 2.
A
Power
●
Before connecting the AC power adaptor to the
wall outlet, ensure that all other connections
have been made.
wall outlet, ensure that all other connections
have been made.
WARNING!
– Use the supplied AC power adaptor only!
Using any other power connection device
may damage your main set!
– For optimal performance, use only the
original AC power adaptor.
– Never make or change connections with
the power switched on.
– Use the supplied AC power adaptor only!
Using any other power connection device
may damage your main set!
– For optimal performance, use only the
original AC power adaptor.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B
Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
VCR or other radiation source.
Polarity
insensitive
insensitive
AC power adaptor
MW loop
antenna
antenna
FM wire antenna
pg001-032_BTM630_05
2007.9.28, 10:12
7