Philips BTM630/05 Manual Do Utilizador
8
English
Preparations
FM Antenna
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
C
Optional connection
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
Connecting a USB mass storage device
or SD/MMC memory card
or SD/MMC memory card
By connecting a USB mass storage device or SD/
MMC memory card to the Hi-Fi system, you can
enjoy the device's or card’s stored music through
the powerful speakers of Hi-Fi system.
MMC memory card to the Hi-Fi system, you can
enjoy the device's or card’s stored music through
the powerful speakers of Hi-Fi system.
●
Insert the USB device's USB plug into the
socket on the set.
socket on the set.
OR
for the devices with USB cables:
1
Insert one plug of the USB cable (not supplied)
to the
to the
socket on the set.
2
Insert the other plug of the USB cable to the
USB output terminal of the USB device.
USB output terminal of the USB device.
OR
for the memory card:
●
Fully insert the memory card (metal contact
facing left) into the
facing left) into the
SD • MMC slot on the top
of the system.
Connecting other equipment to your
system
system
●
Use the supplied Aux-in cable to connect the
AUX jack (3.5mm, located on the top panel) to
an AUDIO OUT or headphone jack on an
external device (such as TV, Laser Disc player,
DVD player or CD recorder).
AUX jack (3.5mm, located on the top panel) to
an AUDIO OUT or headphone jack on an
external device (such as TV, Laser Disc player,
DVD player or CD recorder).
Note:
– To connect equipment with two AUX OUT (left/
right) terminals, you can use a “single to double”
cinch cable (not supplied).
– To connect equipment with two AUX OUT (left/
right) terminals, you can use a “single to double”
cinch cable (not supplied).
Inserting batteries into
the Remote Control
the Remote Control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries following the
indications (+/-) inside the compartment.
indications (+/-) inside the compartment.
3
Close the cover.
3
1
2
Using the Remote Control to operate
the system
the system
1
Aim the Remote Control directly at the remote
sensor (IR) on the front panel.
sensor (IR) on the front panel.
2
Do not put any objects between the Remote
Control and the system while operating the
system.
Control and the system while operating the
system.
CAUTION!
–
–
Remove batteries if they are
exhausted or if the Remote Control is
not being used for a long time.
–
not being used for a long time.
–
Do not use old and new or different
types of batteries in combination.
–
–
Batteries contain chemical substances,
so they should be disposed of properly.
pg001-032_BTM630_05
2007.9.28, 10:12
8