ZyXEL P-660HW-D1 Guia Do Utilizador

Prestige 660H/HW Series User’s Guide

Chapter 7 Wireless LAN (Prestige 660HW)

100

7.9.1.1.1  Reset button

If you use the Reset button, the default (01234567) or previous saved (through the web 
configurator) Setup key is used to encrypt the settings that you want to transfer. 

Hold in the Reset button for one or two seconds. 

Note: If you hold in the Reset button too long, the device will reset to the factory 

defaults!

7.9.1.1.2  Web Configurator

Click WIRELESS LAN, OTIST to display the next screen.

Figure 36   OTIST

The following table describes the fields in this screen. 

Table 24   OTIST 

Key

Enter the setup key up to eight printable characters. The default OTIST setup key is 

"01234567".

Note: If you change the OTIST setup key here, you must also make the 

same change on the wireless client(s).

Yes!

To have OTIST automatically generate a WPA-PSK key, select this check box. If you 

manually configured a WEP key or a WPA-PSK key and you also select this check box, 

then the key you manually configured is used.

Back

Click Back to go to the main wireless LAN setup screen. 

Start

Click Start to encrypt the wireless security data using the setup key and have the 

Prestige set the wireless station to use the same wireless settings as the Prestige. You 

must also activate and start OTIST on the wireless station at the same time. 
The process takes three minutes to complete.

Cancel

Click Cancel to begin configuring this screen again.