ZyXEL P-660HW-D1 Guia Do Utilizador

Prestige 660H/HW Series User’s Guide

Chapter 7 Wireless LAN (Prestige 660HW)

102

1 If you enabled OTIST in the wireless client, you see this screen each time you start the 

utility. Click Yes for it to search for an OTIST-enabled AP.

Figure 42   Start OTIST?

2 If an OTIST-enabled wireless client loses its wireless connection for more than ten 

seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually 
have the wireless client search for an OTIST-enabled AP, there is no timeout; click 
Cancel in the OTIST progress screen to stop the search.)

3 When the wireless client finds an OTIST-enabled AP, you must still click Start in the AP 

OTIST web configurator screen or hold in the Reset button (for one or two seconds) for 
the AP to transfer settings.

4 If you change the SSID or the keys on the AP after using OTIST, you need to run OTIST 

again or enter them manually in the wireless client(s).

5 If you configure OTIST to generate a WPA-PSK key, this key changes each time you run 

OTIST. Therefore, if a new wireless client joins your wireless network, you need to run 
OTIST on the AP and ALL wireless clients again.

•

In the wireless client, you see this screen 
if it can't find an OTIST-enabled AP 
(with the same Setup key). Click OK to 
go back to the ZyXEL utility main 
screen.

Figure 41   No 

AP

 with 

OTIST 

Found

•

If there is more than one OTIST-enabled AP within range, you see a screen asking 
you to select one AP to get settings from.