Hoshizaki fh1-ssb Guia Do Utilizador

1

All parts are factory adjusted. Improper adjustments may result in failure or loss 
of product.

Supply power to the unit. Open the front panel for access to the power switch—located 
on the front of the control box—and move the switch to the "ON" position. Allow the unit 
to pull down prior to loading it with food products.

• TempGuard Refrigerators and Freezers: At startup, there is a  1/ minute 

delay before the compressor starts.
Note: On Dual Temp units, there is a delay of approximately 10 seconds 

between one compressor start (i.e. freezer) and the next compressor 
start (i.e. refrigerator).

• SafeTemp Refrigerators: At startup, there is a  minute delay before the 

compressor starts.

• SafeTemp Freezers: At startup, a defrost is initiated.

• The cabinet temperature is displayed on the control panel. See Fig. 7. The display 

default is °F, but it can be changed to read °C. To change, see "II.C.1.c) Changing the 
Temperature Display Scale (°F or °C)".

• The cabinet temperature is updated every 0 seconds.

Front Panel

Control 
Panel

Door

Arrow