Hoshizaki fh1-ssb Guia Do Utilizador

13

The temperature setpoint is the value for the average cabinet temperature. The 
temperature differential for the compressor to turn on and off is ±3°F of the setpoint. For 
example, setpoint = 36°F, compressor on at 39°F, compressor off at 33°F. If necessary, 
adjust the setpoint temperature as follows:

1) Press and hold the up/down arrows simultaneously for 3 seconds. The current 

temperature setpoint will be displayed. 

) To change the setpoint, press the up/down arrows until the desired value is displayed. 

For refrigerators, the cabinet temperature is adjustable between 36°F and 50°F (.°C 
and 10°C). The factory default is 36°F (.°C). For freezers, the cabinet temperature 
is adjustable between -10°F and 5°F (-3.3°C and -3.9°C). The factory default is -3°F 
(-19.4°C).

3) Press "ENTER" to set the value and view the next setting. If no change in the value 

is desired, press "ENTER", and the next setting will be displayed. At the end of the 
sequence, press "ENTER", and the unit will return to normal display mode. 

Important Note: For the change to take effect, you must cycle through the menu until 

you return to the normal display.

To change the display scale, follow the steps below.

1) Press and hold the up/down arrows simultaneously for 3 seconds. Press "ENTER" until 

the F or C temperature display scale is displayed.

) To change the temperature display, press the up/down arrows until the desired scale is 

displayed. The factory default is °F.

3) Press "ENTER" to set the value and return to normal display mode. 

Important Note: For the change to take effect, you must return to the normal display.

• The cabinet temperature is displayed on the control panel. See Fig. 8. The cabinet 

temperature is displayed in °F only.

• The cabinet temperature is updated every  seconds.
• When the fan or compressor is energized or defrost is initiated, the corresponding 

indicator light turns on. 

Front Panel

Door

Arrow

Control 
Panel

Indicator 
Lights