Sanyo PLC-WM5500L Guia Do Utilizador

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that 
contains a small amount of non-abrasive camera lens cleaner, 
or use a lens cleaning paper or commercially available air 
blower to clean the lens. 

Avoid using an excessive amount of cleaner. Abrasive 
cleaners, solvents, or other harsh chemicals might scratch the 
surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. 
When the cabinet is heavily soiled, use a small amount of 
mild detergent and finish with a soft dry cleaning cloth. Avoid 
using an excessive amount of cleaner. Abrasive cleaners, 
solvents, or other harsh chemicals might scratch the surface 
of the cabinet.

When the projector is not in use, put the projector in an 
appropriate carrying case to protect from dust and scratches.

Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire hazard 
may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely 
high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the 
flammable air spray but also by the cold air.