Sanyo PLC-WXU700A Manual Do Utilizador

PIN (Personal Identification Number) code is a security 

code that allows the person who knows it to operate the 

projector. Setting a PIN code prevents unauthorized use of 

the projector.

A PIN code consists of a four-digit number. Refer to the PIN 

code lock function in the Setting Menu on pages 59-60 for 

locking operation of the projector with your PIN code.

Use the Point 

▲▼

 buttons to enter a number. Press the 

Point 

►

 button to fix the number and move the red frame 

pointer to the next box. The number changes to 



. If you 

fixed an incorrect number, use the Point 

◄

 button to move 

the pointer to the number you want to correct, and then 

enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to 

Set. 

Press the SELECT button so that you can start to operate 

the projector.

If you entered an incorrect PIN code, 

PIN code and the 

number (



) will turn red for a moment. Enter the 

correct PIN code all over again.

If you forget your PIN code, the projector can no 

longer be started. Take a special care in setting 

a new PIN code; write down the number in a 

column on page 83 of this manual and keep it 

on hand. Should the PIN code be missing or 

forgotten, consult your dealer or service center.

After the OK icon disappears, you can operate 

the projector.  



  • If the PIN code number is not entered within 

three minutes after the PIN code dialog box 

appeared, the projector will be turned off 

automatically.

  • The "1234" is set as the initial PIN code at 

the factory.