Sanyo PLV-Z4 Manual Do Proprietário
34
Screen
✔
Note:
• When the video signal format is 720p, 1080i, or HDTV, the Screen Menu cannot be
selected except for Full, Zoom, Caption in and Natural wide 2.
• When Normal is selected with a computer input, the image is projected at the
inputted resolution.
• This projector cannot display any resolution higher than 1920 x 1080. If your
computer’s resolution is higher than that, lower the resolution before connecting to
the projector.
the projector.
• The image data other than the 1280 x 720 resolution is modified to fit the screen
size in initial mode.
• The Vertical adj. function is operated only when Zoom or Caption in is selected.
• The panning function for Normal through is operated only with a computer input.
• The panning function for Normal through is operated only with a computer input.
Fit the image to the center of the screen without modification.
(You can enjoy a high-quality image even though the projected
image is smaller.)
When the original image size is larger than the screen size (1280 x
720), adjust the display range with the Panning function.
(You can enjoy a high-quality image even though the projected
image is smaller.)
When the original image size is larger than the screen size (1280 x
720), adjust the display range with the Panning function.
Normal through
Modify a 4 : 3 aspect ratio image to fit the screen size (16 : 9
aspect ratio) by stretching the image to make it look natural.
aspect ratio) by stretching the image to make it look natural.
Natural wide 1
Normal
through
When the signal is 16 : 9, modify a 4 : 3 aspect ratio image to fit
the screen size (16 : 9 aspect ratio) by stretching the image to
make it look natural.
the screen size (16 : 9 aspect ratio) by stretching the image to
make it look natural.
Natural wide 2
Normal
Fit the image to the center of the screen at the normal video
aspect ratio of 4 : 3.
aspect ratio of 4 : 3.
Normal
Fit the image to the screen size (16 : 9 aspect ratio) by
compressing the image including the captions.
With the input signals other than 1080i or 720p, this function is
used to project a 4 : 3 picture with captions at the wide video
aspect ratio of 16 : 9.
When the input signal is 1080i or 720p, a picture with captions in a
16 : 9 screen can be projected by expanding at the wide video
aspect ratio of 16 : 9.
compressing the image including the captions.
With the input signals other than 1080i or 720p, this function is
used to project a 4 : 3 picture with captions at the wide video
aspect ratio of 16 : 9.
When the input signal is 1080i or 720p, a picture with captions in a
16 : 9 screen can be projected by expanding at the wide video
aspect ratio of 16 : 9.
If a part of the captions is out of the screen, adjust the display
range with the Vertical adj. function. See “Vertical adj.” below for
details.
range with the Vertical adj. function. See “Vertical adj.” below for
details.
Caption in
Racing is stimulating!
Let's enjoy it!
Let's enjoy it!
Racing is stimulating!
Let's enjoy it!
Let's enjoy it!
Caption in
Natural
wide 1
Natural
wide 2
When it is in the Zoom or Caption in mode, press the
Point
Point
ed
buttons to display the Vertical adj. dialog box.
Use the Point
ed
buttons to adjust the vertical
position. The adjusting range differs depending on the
input signal.
input signal.
The adjusted value is only effective in the Zoom and
Caption in mode.
Caption in mode.
The Vertical adj. dialog box cannot be displayed when
the On-Screen Menu is on.
the On-Screen Menu is on.
When it is in the Normal through mode, press the Point
ed
buttons to display the panning dialog box. Use the
Point
ed7 8
buttons to pan the image. Only the
displayed direction of arrows are active.
The panning dialog box cannot be displayed when the
On-Screen Menu is on.
The panning dialog box cannot be displayed when the
On-Screen Menu is on.
Racing is stimulating!
Let's enjoy it!
Let's enjoy it!
Racing is stimulating!
Let's enjoy it!
Let's enjoy it!
When the input signal is 1080i or 720p.
Vertical adj.
Panning