Kurzweil k2600 Guia De Configuração Rápida

Startup

Startup—the Details

2-3

Never

block the ventilation openings on the bottom or rear panels; doing so can cause

overheating and serious damage. To provide adequate ventilation, the rear panel should be at
least four inches from any vertical surface.

Connecting the Power Cable (Line Cord)

The K2600 runs on AC power: 100, 120, 220, or 240 volts at 50Ð60 Hz. Your dealer will set the
voltage switch to match the voltage in your area. The voltage level is set with a selector on the
rear panel of the keyboard models of the K2600. You shouldnÕt have to adjust this, and we
recommend that you donÕt.

When youÕve connected the cable at the K2600 end (as you face the back of the K2600, the power
connection is at the leftÑon the K2600R, itÕs on the right), plug it into a grounded outlet. If your
power source does not have the standard three-hole outlet, you should take the time to install a
proper grounding system. This will reduce the risk of a shock.

Power switch

Power connector

SCSI termination switch

SCSI ports

Analog stereo inputs

KDS 8-channel ports

Control Pedal 1 jack

Control Pedal 2 or Breath jack

Optical digital output

MIDI ports

MIDI Thru switch

Foot Switch jacks

Analog audio outputs A–D

Analog Mix output

Headphone jack

Optical digital input

Digital input and output

LCD contrast adjustment

100/120V ~ F2.0A

100/120V ~ F2.0A 250V slow-blow

250V slow-blow

230/240V ~ F1.0A

230/240V ~ F1.0A 250V slow-blow