TallyGenicom 2365 Guia Do Utilizador
User guide
Care and maintenance
119
Care and maintenance
The printer is designed to operate with minimal maintenance. It is
advisable to clean the inside of the printer from time to time with a
vacuum cleaner.
advisable to clean the inside of the printer from time to time with a
vacuum cleaner.
Before cleaning, turn off the printer, wait 5 to 10 seconds and
disconnect the power cable.
disconnect the power cable.
Do not oil or grease the printer, especially the sliderails and
shafts.
shafts.
Replacing the fuse
The printer is provided with a line fuse accessi-
ble from the exterior. Press the fuse cover
slightly inwards with a screwdriver and turn it
until the cover tab comes out through the re-
cess in housing. Then remove the fuse.
ble from the exterior. Press the fuse cover
slightly inwards with a screwdriver and turn it
until the cover tab comes out through the re-
cess in housing. Then remove the fuse.
Install the fuse in reverse order of steps.
Only use the same type of fuse for
replacement.
replacement.
The fuse ratings are specified on the printer
type plate which is mounted above the power
connector on the rear:
type plate which is mounted above the power
connector on the rear:
T4,00AH/250V
12
STOP
STOP
STOP