TallyGenicom 2365 Guia Do Utilizador

After switching on, the printer is automatically set to online mode. 
Only in this mode can it receive data from the computer.

` Tear key (4): Activates the tear function when fanfold paper is 

loaded, see 

If Load is displayed above this key, no paper is loaded in the 
printer or the printer is in park position. In this case the display 
switches between Online and Load paper fromTrac1. Press the 
key to feed paper to the printing position. 

` Setup key: Sets the printer to setup mode. 

` Online key: Sets the printer to offline mode.

Only in this mode is it possible to perform step, line, or form feeds 
from the control panel, see 

data cannot be received. 

` Park key (1): Clears the paper path with paper loaded and acti-

vates paper path quick selection.

` Key   (2): Short keypress: Microstep forward. Long keypress: 

Continuous paper feed. 

` Key   (3): Short keypress: Microstep reverse. Long keypress: 

Continuous paper reverse feed up to the park position. 

` Load key (4): Displays that no paper is loaded in the printer or the 

printer is in park position. In this case the display switches be-
tween Online and Load paper fromTrac1.
If paper is loaded: Loads paper from the selected paper source; 
the display changes to LF/FF
Short keypress: Line Feed (LF). 
Long keypress: Form Feed (FF). 

` Setup key: Sets the printer to setup mode. 

` Online key: Sets the printer to online mode. 

Online

Trac1
Tear

Online

Setup

2

1

3

4