Lexmark W850DN Guia Do Utilizador
R
ESET
THE
PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE
SURE
THE
PAPER
TRAY
IS
INSTALLED
CORRECTLY
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may
not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation
that came with the paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.
that came with the paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.
Solving 2,000-sheet drawer problems
Try one or more of the following:
T
HE
ELEVATOR
TRAY
IS
NOT
WORKING
PROPERLY
•
Make sure the printer is properly connected to the 2,000-sheet drawer.
•
Make sure the printer is turned on.
•
Make sure that the power cord is plugged firmly into the back of the 2,000-sheet drawer.
•
If the tray is empty, then load paper in the tray.
•
Clear any jams.
T
HE
PAPER
FEED
ROLLERS
DO
NOT
TURN
TO
ADVANCE
PAPER
•
Make sure the printer is properly connected to the 2,000-sheet drawer.
•
Make sure the printer is turned on.
T
HE
PAPER
CONSISTENTLY
JAMS
IN
THE
DRAWER
•
Flex the paper.
•
Make sure the drawer is properly installed.
•
Make sure paper is loaded correctly.
•
Make sure the paper or specialty media meets specifications and is not damaged.
•
Make sure the guides are positioned correctly for the paper size loaded.
Memory card
Make sure the memory card is securely connected to the printer system board.
Flash memory card
Make sure the flash memory card is securely connected to the printer system board.
Hard disk with adapter
Make sure the hard disk is securely connected to the printer system board.
Troubleshooting
176