Lexmark W850DN Guia Do Utilizador
M
AKE
SURE
THERE
IS
NOT
TOO
MUCH
PAPER
IN
THE
PAPER
TRAY
Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the
multipurpose feeder.
C
HECK
THE
PAPER
GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
T
HE
PAPER
MAY
HAVE
ABSORBED
MOISTURE
DUE
TO
HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Paper jam message remains after jam is cleared
1
Clear jammed paper from the entire paper path.
2
Press the up or down arrow button until Continue appears, and then press .
Page that jammed does not reprint after you clear the jam
Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1
Press .
2
Press the up or down arrow button until Settings appears, and then press .
3
Press the up or down arrow button until General Settings appears, and then press .
4
Press the up or down arrow button until Print Recovery appears, and then press .
5
Press the up or down arrow button until Jam Recovery appears, and then press .
6
Press the up or down arrow button until On or Auto appears, and then press .
Solving print quality problems
Isolating print quality problems
To help isolate print quality problems, print the print quality test pages:
1
Turn the printer off.
2
From the printer control panel, press and hold and the right arrow button while turning the printer on.
3
Release both buttons when the clock animation appears.
The printer performs its power-on sequence, and then Config Menu appears.
The printer performs its power-on sequence, and then Config Menu appears.
Troubleshooting
178