GE js998skss Instrução De Instalação

Position the range in front of the cabinet
opening.

Make sure that the glass that overhangs
the countertop clears the countertop. 
If necessary, raise the unit by lowering 
the leveling legs.

Push while lifting the range into the
opening, until the range is within 2

″

of engaging the anti-tip bracket.

Remove the protective trim from the side
of glass (if provided).

Using the adjustable pliers or wrench,
carefully screw in the back leveling leg
until the glass overhang comes to rest 
on the countertop.

Then carefully screw in the front two
leveling legs (similar to E above) until the
glass overhang touches the countertop.

Carefully push the range into the opening
until the countertop fully engages the
control panel. The back glass overhang
should cover the cutout opening.

Adjustable wrench
or pliers

Make sure the edge
of the countertop
fits flush against
the end of the
Front Control Panel

Countertop

Plug the range cord into the receptacle.
Locate the cord in the back of the range 
in a manner that it will not touch or be
moved by the drawer.

Position range cord so that
there is no interference with
the storage drawer

When installation is
complete and the range is 
in place, check to be sure
that the rear leveling leg is
fully inserted into the slot 
of the Anti-Tip Bracket.