Toshiba M100 Guia Do Utilizador
143
Expansion Options
Using an SD card
5.375 x 8.375 ver 2.4.0
Formatting an SD card
If you want to format your SD card, you may do so using
Windows
Windows
®
operating system formats such as FAT16 or
FAT32. You can also use the TOSHIBA SD Memory Card
Format Utility. After formatting is complete, there is a
possibility that the SD card may become unusable on some
devices which have an SD card slot.
Format Utility. After formatting is complete, there is a
possibility that the SD card may become unusable on some
devices which have an SD card slot.
Multi Media Cards (MMCs) are not supported by this product.
Stopping or removing the SD card after formatting
If you have formatted the SD card drive with the Windows
®
operating system format (see Formatting an SD Card in the
preceding section), you may be unable to stop or eject your
card. If this occurs, try restarting the computer.
preceding section), you may be unable to stop or eject your
card. If this occurs, try restarting the computer.
Using Standby or Hibernate while using the SD card
It is recommended that you do not select Standby or
Hibernation mode while an SD card is in use. If you do so,
your system may not enter Standby or Hibernation mode,
some tasks may become unresponsive, and the operating
system may not shut down properly. If this occurs, reset your
computer by holding down the power button for four seconds.
Hibernation mode while an SD card is in use. If you do so,
your system may not enter Standby or Hibernation mode,
some tasks may become unresponsive, and the operating
system may not shut down properly. If this occurs, reset your
computer by holding down the power button for four seconds.
Removing an SD card
Before removing an SD card from the SD slot, close any
applications which utilize the SD card. Use the eject utility to
ensure that the card is ready to be removed. Once the activity
indicator light has turned off, you may safely remove the
card.
applications which utilize the SD card. Use the eject utility to
ensure that the card is ready to be removed. Once the activity
indicator light has turned off, you may safely remove the
card.
To remove an SD card, press the card inward to release it. The
card pops out slightly. The device name will disappear only
card pops out slightly. The device name will disappear only
NOTE