Toshiba M100 用户指南

143

5.375 x 8.375 ver 2.4.0

If you want to format your SD card, you may do so using 
Windows

®

 operating system formats such as FAT16 or 

FAT32. You can also use the TOSHIBA SD Memory Card 
Format Utility. After formatting is complete, there is a 
possibility that the SD card may become unusable on some 
devices which have an SD card slot.

Multi Media Cards (MMCs) are not supported by this product.

If you have formatted the SD card drive with the Windows

®

 

operating system format (see Formatting an SD Card in the 
preceding section), you may be unable to stop or eject your 
card. If this occurs, try restarting the computer.

It is recommended that you do not select Standby or 
Hibernation mode while an SD card is in use. If you do so, 
your system may not enter Standby or Hibernation mode, 
some tasks may become unresponsive, and the operating 
system may not shut down properly. If this occurs, reset your 
computer by holding down the power button for four seconds.

Before removing an SD card from the SD slot, close any 
applications which utilize the SD card. Use the eject utility to 
ensure that the card is ready to be removed. Once the activity 
indicator light has turned off, you may safely remove the 
card.

To remove an SD card, press the card inward to release it. The 
card pops out slightly. The device name will disappear only 

NOTE