Adtran 550 Guia Do Utilizador
ATLAS 550 System Manual
Section 2 Engineering Guidelines
61200305L2-1B
© 2004 ADTRAN, Inc.
29
Table 3. Description of ATLAS 550 LEDs
For these LEDs...
This color light...
Indicates that...
System Status
Power
Green
the unit is on.
Off
the unit is off.
System
Green (solid)
no diagnosed system faults were found.
Green (fast blink)
a flash download is in progress.
Yellow (solid)
a fault was diagnosed, but the condition no longer exists.
The condition will be recorded in the system log.
The condition will be recorded in the system log.
Red (solid)
an error condition with either the power supply or the
system temperature is present.
system temperature is present.
Red (fast blink)
a fatal error occurred during flash download.
Off
power is not currently supplied to the system.
Ethernet
Green (solid)
the physical link is up.
Green (flashing)
there is activity on the LAN.
Off
the physical link is down - no Ethernet connection.
Remote
Yellow
a user is logged into the system via the ADMIN/CRAFT
port or via the ETHERNET port.
port or via the ETHERNET port.
Off
there are no users logged into the system.
Network Modules Status
OK
Green (solid)
the network interface is operating normally with error-free
operation. If the interface experiences alarms, the OK
LED remains off.
operation. If the interface experiences alarms, the OK
LED remains off.
Test
Yellow (solid)
the interface is operating in a test mode. This includes a
self-test, a test pattern, or a test loopback. When
illuminated, this LED also indicates that normal data flow
is not occurring on the module ports.
self-test, a test pattern, or a test loopback. When
illuminated, this LED also indicates that normal data flow
is not occurring on the module ports.
Error
Red (blink)
an error such as BPV (bipolar violation), OOF (out of
frame), or CRC (cyclic redundancy check) has occurred.
frame), or CRC (cyclic redundancy check) has occurred.
Alarm
Red (solid)
an alarm condition has been detected. When the alarm
condition is no longer valid, the OK LED illuminates. To
view an alarm condition, select the active alarm menu
item. If the alarm conditions have been corrected, you
can view the alarm which caused the activation of the
ALARM LED in the system log.
condition is no longer valid, the OK LED illuminates. To
view an alarm condition, select the active alarm menu
item. If the alarm conditions have been corrected, you
can view the alarm which caused the activation of the
ALARM LED in the system log.