Adtran 550 Guia Do Utilizador

ATLAS 550 System Manual

Section 2  Engineering Guidelines

61200305L2-1B

© 2004 ADTRAN, Inc.

27

The ATLAS 550 base unit dimensions are 17.08” W x 11.67” D x 3.47” H. The option modules fit inside 
the base unit.

The ATLAS 550 has a maximum power consumption of 60 W and a maximum current draw of 2 A 
(AC System) or 5 A (DC System) regardless of the configuration of option modules installed in the base 
unit.

The front panel contains the Alarm Cut-off switch (

), the 

port, and the status LEDs for the 

system controller, the network modules, and the option modules. Figure 1 identifies the 

 switch, the 

port, and the

LEDs.

Pressing the 

 switch deactivates (clears) the Alarm Relay, located on the back panel of the 

ATLAS 550, after an alarm condition has occurred. If an alarm condition is corrected and then reoccurs, 
the Alarm Relay re-energizes.

Use the 

port to configure the system via an EIA-232 connection. Table 1 on page 28 gives the 

port pinout.

Network

Module LEDs

Option Module LEDs

Craft 

Port

ACO

Switch

System Status

LEDs