Adtran 550 Guia Do Utilizador
ATLAS 550 System Manual
Section 2 Engineering Guidelines
61200305L2-1B
© 2004 ADTRAN, Inc.
35
Test Interface
This module contains two test interfaces:
NETWORK
and
MON
. The
NETWORK IN
and
OUT
Bantam test
jacks provide intrusive test capability for the incoming E1. By connecting test equipment to these jacks, the
E1 connection breaks and the test equipment terminates the incoming E1. The
E1 connection breaks and the test equipment terminates the incoming E1. The
MON IN
and
OUT
Bantam
test jacks provide a bridged access jack for nonintrusive monitoring of the incoming E1. When connected
to this jack, configure the test equipment for bridged termination.
to this jack, configure the test equipment for bridged termination.
Modem Management Network Module (P/N 1200341L1), USOC RJ-11C
The Modem Management Network Module provides a single 6-pin modular jack (RJ-11C) (see Table 10
for the pinout). The Modem Management Network Module provides the following functions:
for the pinout). The Modem Management Network Module provides the following functions:
•
V.34, V.32bis, V.32, V.22, V.23, and V.21 data modulation schemes
•
Connection rates from 2400 to 33.6K baud
•
V.42 LAPM, MNP 2-4, and MNP 10 error correction methods
•
V.42bis and MNP 5 data compression algorithms
Table 9. E1/PRA Network Interface 15-pin Female D-connector Pinout
Pin
Name
Description
1
TXDATA-RING (R)
Transmit data toward the network
2,4,5,7
FRAME GROUND (FG)
Grounded to chassis
3
RXDATA-RING (R1)
Receive data from the network
6,8,10,12-15
––––––
Unused
9
TXDATA-TIP (T)
Transmit data toward the network
11
RXDATA-TIP (T1)
Receive data from the network
Table 10. Modem Management Network Module RJ-11C Pinout
Pin
Name
Description
1, 2, 5, 6
–––
Unused
3
TIP
Tip to and from the analog interface
4
RING
Ring to and from the analog interface