Netopia r3100-u Guia De Referência

Smar tStar t. See the on-line User’s Reference Guide for instructions.

When the test is successful, Smar tStar t presents you with a different screen, depending on the type of router 
you are configuring.

■

If you are configuring a router that defaults to an unswitched inter face, such as IDSL, you will see the 

 shown below.

■

If you are configuring an ISDN router, you may see the 

 shown below, 

displaying the possible switch types available for your region. This screen may not appear, if there is only 
one switch type in use in your region or you are using a customized version of Smar tStar t, or the ISDN 
Wizard has automatically detected your switch type.

Additional Configuration screen. If you have a router that 
has a permanent unswitched connection to your ISP, such 
as an IDSL, SDSL, or Ethernet WAN inter face router 
attached to a cable modem, the Additional Configuration 
screen appears.

You may want to do additional configuration to customize 
your network environment. Smar tStar t lets you launch 
your Telnet application. Click the Telnet button to launch 
your Telnet application.

Advanced configuration options available via Telnet are 
explained in 

.

However, if you need no fur ther configuration options, 
click Quit. Congratulations! You’re done!

ISDN Switch Type screen. If you have an ISDN router, the 
ISDN Switch Type screen appears.

Select one of the suppor ted ISDN switch types for your 
ISDN line. Your telephone company should have provided 
this information when your ISDN line was installed.

When you have done this, click Next.

Note: The switch types listed are different for different 
regions. If your region has only one switch type, this 
screen may not appear. In that case, skip to