Netopia R7200 Guia De Referência
8-8 User’s Reference Guide
IP parameters (default profile) screen
If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to
configure various IP parameters for SDSL connections established without an explicitly configured connection
profile:
configure various IP parameters for SDSL connections established without an explicitly configured connection
profile:
For an SDSL link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can enable
it by toggling to Yes. For details on setting up IP Parameters see
it by toggling to Yes. For details on setting up IP Parameters see
.
IP Parameters (Default Profile)
Address Translation Enabled: No
Filter Set (Firewall)...
Remove Filter Set
Remove Filter Set
Receive RIP: Both
Transmit RIP: Off
Transmit RIP: Off
Return/Enter accepts * Tab toggles * ESC cancels.