Справочное Руководство для Netopia R7200

If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to 
configure various IP parameters for SDSL connections established without an explicitly configured connection 
profile:

For an SDSL link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can enable 
it by toggling to Yes. For details on setting up IP Parameters see 

.

                        IP Parameters (Default Profile)

         Address Translation Enabled:       No

         Filter Set (Firewall)...
         Remove Filter Set

         Receive RIP:                       Both
         Transmit RIP:                      Off

Return/Enter accepts * Tab toggles * ESC cancels.